ActualitéImpression 3D

Les nouveautés de Ultimaker Cura 5

Cura est le logiciel phare pour imprimantes 3D. Les fichiers que l’on télécharge sur internet ou que l’on dessine ne peuvent pas directement être pris en compte par l’imprimante 3D. Il faut d’abord le « trancher » c’est-à-dire le préparer en fonction des caractéristiques de l’imprimante, mais aussi du filament utilisé (PLA, ABS, TPU…). Pour cela, le logiciel Ultimaker Cura est le leader des slicers, tout en étant open source et gratuit. De nombreux constructeurs d’imprimantes 3D recommandent d’utiliser Cura ou ont créé un fork pour adapter le logiciel à leur gamme de machines (Creality, Dagoma…).

Récemment, Ultimaker (constructeur d’imprimantes lui aussi) a dévoilé Cura 5.0.0, une nouvelle version majeure qui apporte de nombreuses nouveautés. Mis en ligne depuis le 17 mai 2022, Cura 5 a été accompagné d’une conférence Ultimaker pour présenter les améliorations et nouvelles fonctions utiles pour les makers à la maison ou les techniciens fabrication additive en entreprise.

Une grande partie de ces changements a été apportée par la communauté de makers qui contribuent à améliorer Cura. Des bienfaiteurs que Ultimaker remercient à chaque changelog de version majeure ou mineure.

ultimaker cura 5 imprimante 3D

 

Liste des nouveautés de Cura 5.0 (changelog)

New slicing engine
Following special beta releases to test the Arachne engine, we are pleased to announce our new slicing engine is here in Ultimaker Cura! This all-new engine uses variable line widths when preparing files for printing, meaning you can now print thin and intricate parts more accurately and with greater strength.

Renewed the Ultimaker Cura Marketplace
We have streamlined the workflow for accessing the Ultimaker Marketplace inside of Ultimaker Cura. The UI has been improved and it’s now easier and faster to find and install plugins and material profiles.

Improved print profiles for Ultimaker printers
The new slicing engine in Ultimaker Cura 5.0 has helped us to improve our print profiles. This means that users of Ultimaker printers can achieve speed increases of up to 20%.

Upgrade from Qt5 to Qt6
Ultimaker Cura 5.0 is now compatible with Apple M1.

Other new features and improvements:

  • New Cura icon
  • New Cura splash screen
  • Updated the digital build plates for Ultimaker printers
  • Introduce Minimum Wall Line Width
  • Settings for metal printing implemented
  • Shrinkage compensation is now available for PLA, tPLA and PETG
  • Improved default Line Widths for Spiralize
  • Decrease resolution to remove some buffer underruns
  • Incomplete languages are now shown in the language drop-down menu
  • Improved the visibility of the checkboxes

Bug fixes:

  • Added the Scale Fan Speed From 0 to 1 setting for printers that interpreted fan speed as percentages
  • Fixed a bug with extra travel moves increased the printing time
  • Fixed a bug where Monotonic Ironing breaks Ironing,
  • Changed the priority of CuraEngine
  • Fixed a bug where increasing Filter distances creates extremely wide lines
  • Fixed double scroll bar
  • Fixed a bug where maximum resolution/deviation was not applied to surface mode
  • Fixed a bug where the seam placement was uneven
  • Fixed a bug where Top Surface Skin Layers didn’t work
  • Fixed a bug where Speed in the flow setting were not respected
  • Fixed a bug with unnecessary retracted travel moves
  • Fixed a bug where the Ironing Inset didn’t work
  • Fixed a bug where Support Layers were missing
  • Fixed a crash if Randomize Infill Start was used
  • Fixed a bug where Combing was in the wrong part with dual extrusion
  • Fixed a crash with Bridging and Top Surface Skin Layers
  • Fixed a bug where modifier meshes didn’t work in one-at-a-time mode
  • Fixed a bug where Tree Support Branches where not being generated
  • Fixed a bug where less support was generated
  • Changed the possibility for 100% Infill Bottom Layer for Spiralize
  • Fixed disallowed areas for Brim gap

Bug fixes after the 5.0 beta:

  • Fixed a bug where Retraction Distance couldn’t have small values
  • Fixed a bug where there were duplicated themes
  • Fixed a bug where there were scrollbars showing on tooltips
  • Fixed a bug where drag and drop was not working on the first run of Cura
  • Fixed a bug where Infill Percentages are not lined up correctly in Recommended mode
  • Fixed a bug where it wasn’t clear if the text field was active
  • Fixed a bug where highlighted text in text field is unreadable
  • Fixed missing icons
  • Fixed a bug where scrolling through long material list was not possible
  • Fixed a bug where multiply was not possible
  • Fixed a bug where micro segments are causing blobs
  • Fixed a bug where there was over extrusion when printing with gradual infill
  • Fixed a bug where error values could slice
  • Fixed a bug where the CPU was high when Cura was idle
  • Fixed a bug where an existing gcode file was overwritten when you select no to overwrite
  • Fixed a crash when selecting extruders
  • Fixed a bug where exporting profiles didn’t work
  • Fixed a slicing error with certain infill patterns
  • Fixed a bug where printing via USB stops during the print
  • Fixed a bug where the toolgrips where missing
  • Fixed a bug where the print values didn’t save when closing the page
  • Fixed the width of a Menu to fit the widest MenuItem
  • Fixed a bug where Use Single Instance of Cura in Preferences crashes upon restart
  • Fixed a bug where travels would go through the model with printing PVA
  • Fixed a bug where Concentric ironing was affecting the print quality
  • Fixed a bug where there were missing infill layers
  • Fixed AppRun permissions

Printer definitions, profiles and materials:

  • Added Atom 3 and Atom 3 Lite printer definitions
  • Added Layer One Black PLA, Dark Grey PLA and White PLA
  • Added FLSUN Q5 printer definition
  • Added Creatlity CR100 printer definition
  • Added Mixware Hyper-S printer definition
  • Added Creality Sermoon D1 printer definition
  • Added Volumic SH65, Stream30Pro MK3 and Stream30Ultra SC2 printer definitions
  • Updated Eryone Thinker and ER20 profiles
  • Updated Atom 2 profile
  • Added Hellbot Hidra and Magna series printer definitions
  • Updated Snapmaker 2 End-Gcode
  • Updated the Tinyboy Fabricator printer definitions
  • Updated the Creality Ender 5 printer profile

Community translations:

  • Updated the Brazilian Portuguese translation
  • Updated the Czech translation
  • Updated some of the Simplified Chinese translation

Known issues:

  • Monotonic ordering is repeating parts of the print
  • Missing skin layers when using monotonic and Zigzag Pattern for Top/Bottom layers
  • Slicing failure with complex models and using Tree Support
  • Travel moves are sometimes not optimized
  • Combing is not always working as expected
  • AppImage will not always launch on Ubuntu 22.04
  • Concentric support is not working correctly

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Bouton retour en haut de la page